Print PDF
Favorite
Email
Step 2The Two Critical Measurements
The first critical measurement is the desired height of the laptop's LCD screen. I propped the laptop up on books until it was roughly the same height as a LCD monitor, then measured from the table to the bottom of the laptop's back edge. In my case, the measurement was 4 inches.
The second critical measurement is the length to be supported by the stand. Measure diagonally across the bottom of the laptop, starting and ending about 2 inches in from the edge. Adjust this diagonal as needed to avoid bumps, feet, and other extrusions from the laptop's bottom. In my case, the measurement was 15 1/2 inches.
The second critical measurement is the length to be supported by the stand. Measure diagonally across the bottom of the laptop, starting and ending about 2 inches in from the edge. Adjust this diagonal as needed to avoid bumps, feet, and other extrusions from the laptop's bottom. In my case, the measurement was 15 1/2 inches.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
