Introduction: Make a Lego Heart
This will show you how to make a small little lego heart, great for valentines day! There are some stores that sell these for 15 bucks in a chain or necklace form, but you can easliy make them by yourself! (If you don't want it to break apart, a tiny drop of super glue to the stud will hold it in place! Just make sure to wear some gloves!)
It won't break apart on a small drop, and takes about 5 minutes to make! Before you start, it does use 10 semi-rare parts that you need to make sure you have. Once you are finished, you can add, customize, or even make a necklace out of it!
Step 1: Gather the Parts
The main parts you will need are four roof tiles 1X2, and six of the inverted version, along with a few regular bricks with 1 width.
You don't need to use any exact color either, in fact, all red looks great!
Step 2: Starting the Frame
To begin with the frame, make two groups of three roof tiles (inverted) together, as seen in the picture.
Step 3: Filling Up the Heart
To start the bottom part of the heart, put the 2 roof tile groups opposite, and add a 2x1 and a 4x1 brick!
Step 4: Adding the Last Layer
Finish up the last layer by putting 8 units of any brick with 1 width on top on the heart. I would use a long single piece, as this holds the whole heart together!
Step 5: Finishing It Up!
To end, add 4 regular roof tiles on the top, making a heart!
Step 6: Customize It!
Be sure you add your own little spa-zaz to show her you care! Add a chain, make an animal, heck strap on some velcro to the back and wear it!
You can make a necklace by drilling a small hole in the middle of the red section, and sliding a string through it!
We have a be nice policy.
Please be positive and constructive.