Instructables
loading
loading

Make a Nerf Laser Targeting System from the Tactical Light

Step 3: Taking Apart the Laser Pointer

Picture of Taking Apart the Laser Pointer
IMG_0151.JPG
IMG_0155.JPG
IMG_0159.JPG
IMG_0162.JPG
Take off the head and tail of the laser pointer, and remove any batteries.

Then, as you did with the light, stick a screwdriver into the side of the laser pointer at the Head end and create a grasping point for the needlenose pliers. After you have a point, begin to unwrap the thin metal casing from the actual device, which should only take about an inch and half of stripping at most. you can discard the casing afterwards.
 
Remove these adsRemove these ads by Signing Up