Print PDF
Favorite
Email
Step 7Close it up
At this point you can close up the box and you are done.
Test it by hooking up the input in the top jack, snooping interface in the middle, and the destination on the bottom.
You can start up your snooping program and watch the traffic spin by. Make sure to have the snooping interface set to promiscuous mode and not assigned an ip.
Test it by hooking up the input in the top jack, snooping interface in the middle, and the destination on the bottom.
You can start up your snooping program and watch the traffic spin by. Make sure to have the snooping interface set to promiscuous mode and not assigned an ip.
| « Previous Step | Download PDFView All Steps | Next Step » |
When I plug the cable from a NB with wireshark, the connections were cut off on two machines. Could any explain? Thanks.