Print PDF
Favorite
Email
Step 5Step four: Enlarge the Holes, and Create a Pattern
Using the middle sized drill bit, carefully enlarge each hole.
At this point I started to wonder if I was going to compromise too much of the peel’s strength so I opted for an alternating pattern of small holes and larger holes, with the front edge and both sides larger holes.
At this point I started to wonder if I was going to compromise too much of the peel’s strength so I opted for an alternating pattern of small holes and larger holes, with the front edge and both sides larger holes.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
