For this project you need:
>>>1 sheet of white card stock
>>>an empty mint tin
>>>a pencil
>>>a ruler
>>>colored pencils
>>>lots of different colored felt
>>>a needle and thread
Remove these ads by
Signing UpStep 1: Make the background!
Take a piece of white card stock, and trace the perimeter of your mint tin on it. Cut out this shape. You can make as many of these pieces as you want, they will be your background sections.
Next, draw two lines on your pieces. Mine were about 1.5cm (1/2 inch) from the sides, and about 2cm (0.75 inches) from the top/bottom. Draw the lines on oppositely so that one space is at the top and one space is at the bottom. (Please look at the picture, I can't explain this very well :D) I also made a little ruler out of scrap paper so I didn't have to measure each one.
Cut on the vertical lines!
*Hint- you may have to cut your background pieces a bit smaller than what you traced so they can fit inside the tin.
And yes, I know I cut the lines wrong in the last picture. It was an accident!
Toasty2222 (author)
in reply to Jul 9, 2012. 10:14 AMReply
ChrysN
says:
Jul 5, 2012. 4:18 PMReply
scoochmaroo
says:
Jul 5, 2012. 10:10 AMReply























Not Nice




















Visit Our Store »
Go Pro Today »



