Print PDF
Favorite
Email
Step 7Speakers
This is one of the easiest steps.
NOTE: The instructions on how to make the speaker notch is not in the console, and is of slightly different colour to my final one. Make yours straight onto the body however. If you don't like the colour, you can easily change it.
Simply make:
1)1 speaker notch
2) then duplicate it twice (1 row of 3).
3) Now merge those 3 layers together, and duplicate them twice again (1 3x3 grid)
4) Now merge these, to have 1 speaker.
You could leave at this and have a mono sound system, like Nintendo's iconic Gameboy series. Or you could have 2. This is very hard to get the spacings right, so get the grid view open to get each speaker the same distance from the screen, like in my games console. Duplicate the 3x3 grid and position accordingly.
NOTE: The instructions on how to make the speaker notch is not in the console, and is of slightly different colour to my final one. Make yours straight onto the body however. If you don't like the colour, you can easily change it.
Simply make:
1)1 speaker notch
2) then duplicate it twice (1 row of 3).
3) Now merge those 3 layers together, and duplicate them twice again (1 3x3 grid)
4) Now merge these, to have 1 speaker.
You could leave at this and have a mono sound system, like Nintendo's iconic Gameboy series. Or you could have 2. This is very hard to get the spacings right, so get the grid view open to get each speaker the same distance from the screen, like in my games console. Duplicate the 3x3 grid and position accordingly.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
