Print PDF
Favorite
Email
Step 9Pushing the Shutter Button
Ok, this is a pretty iffy solution, but it works!
It's hard to explain, but here I go..
Get a plastic cylinder that it small enough to push the camera's button. Cut it really short so that it touches both the inside of the box and the shutter button of the camera (when the camere is inside the foam insert, inside the case).
It WILL take some fiddling to get right, so don't give up if it's not quite working.
Now all you have to do it gently squeeze the box, and the plastic cylinder pushes the button!
It's hard to explain, but here I go..
Get a plastic cylinder that it small enough to push the camera's button. Cut it really short so that it touches both the inside of the box and the shutter button of the camera (when the camere is inside the foam insert, inside the case).
It WILL take some fiddling to get right, so don't give up if it's not quite working.
Now all you have to do it gently squeeze the box, and the plastic cylinder pushes the button!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
