Print PDF
Favorite
Email
Step 14Attach angled pockets
a. Align the pockets on top of the pouch as they will be sewn and tape them to each other. The angled end pieces should be a good .5 (1.27) away from the top edge and inner seam. Remove the two pockets that are now taped together and apply a basting stitch along the outside long edges to secure them together.
b. Tape the basted pockets back onto the pouch as shown. Like you did in step 10, run your thumbnail along the edge of the sheet metal underneath to make a crease and sewing guide. Stitch a 'U' around them the same way you did the other set of pockets. Back tack a few times over the edges of the pocket 'hems.'
b. Tape the basted pockets back onto the pouch as shown. Like you did in step 10, run your thumbnail along the edge of the sheet metal underneath to make a crease and sewing guide. Stitch a 'U' around them the same way you did the other set of pockets. Back tack a few times over the edges of the pocket 'hems.'
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
