3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

RFID Shielding Pouch Out of 'Trash'

Step 15Attach Velcro, double stitch

Attach Velcro, double stitch
«
  • 1574734710_7dc8f70d62.jpg
  • 1573848159_8680c09b62.jpg
  • 1574737048_0221b9e3ae.jpg
a. Measure and cut a length of Velcro the width of the pouch---the distance between the outer seams around the velcro. With the two velcro pieces stuck together, round the corners.

b. Place the Velcro pieces just below the bottom seams. Test alignment by closing and inspecting before stitching. Stitch just inside the edge of the Velcro, around the whole perimeter of it, and back-tack extra on the short ends. Because of the size of my sewing machine and how rigid the pouch is, I was unable to fully rotate the pouch under the needle. Sew down one length of the velcro, back-tack across the width a couple times, and then stitch backwards back up the other side of the velcro.

c. Double stitch around the entire circumference of the body of the pouch, 1/8" (.32) from the inner seams, sewing down and around the bottom of the Velcro.
« Previous StepDownload PDFView All StepsNext Step »

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
8
Followers
1
Author:laras