Print PDF
Favorite
Email
Step 20Optional: Personalize with a fused 'logo'
Put your mark on the front by fusing a stencil-cut design made from a sheet of fused plastic. Many options for contrast, transparency or embossed looks. The mini iron lets you be precise. Test on scrap first!
Jolly Roger Design:
a. Fuse #3 layers of clear plastic together.
b. Tape paper outline on workspace. Tape fused clear sheet on top. Trace outside perimeter with black fine point sharpie. Cut out with xacto.
c. Fuse to the outside. The clear plastic can disappear into the black quickly creating a funky, printed varnish look.
Jolly Roger Design:
a. Fuse #3 layers of clear plastic together.
b. Tape paper outline on workspace. Tape fused clear sheet on top. Trace outside perimeter with black fine point sharpie. Cut out with xacto.
c. Fuse to the outside. The clear plastic can disappear into the black quickly creating a funky, printed varnish look.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
