Print PDF
Favorite
Email
Step 8Assembly
Next, you need to put your finished parts together with your converted-crib toddler bed.
Disassemble the frame. Set aside the ends, and two of the black pipes. Keep the crosspieces assembled into u-shapes with the black pipes.
Slide the end pieces into the casings at the ends, then slip one of the crosspiece assemblies into the casings going towards an end piece and plug the black pipes into the elbow joints. Do likewise with the other one.
Take the last two back pipes and slip them into the split casings in the middle. Plug them into the open ends of the t-joints to complete the frame. The canopy is still fairly slack when not installed, so it should not be too difficult to do this.
Disassemble the frame. Set aside the ends, and two of the black pipes. Keep the crosspieces assembled into u-shapes with the black pipes.
Slide the end pieces into the casings at the ends, then slip one of the crosspiece assemblies into the casings going towards an end piece and plug the black pipes into the elbow joints. Do likewise with the other one.
Take the last two back pipes and slip them into the split casings in the middle. Plug them into the open ends of the t-joints to complete the frame. The canopy is still fairly slack when not installed, so it should not be too difficult to do this.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
