Print PDF
Favorite
Email
Step 2Bottom Out
The first thing you need to do is remove the bottom mesh of the pencil cup. I first tried cutting it out with small wire cutters, but found that pushing down on the mesh would break it free rather easily.
Once the bottom of the cup is removed, check the edge for straggling bits of metal that someone (like you) could cut their fingers on. Get some needle-nose pliers (I used the Gerber multitool that I always carry) and pull them off. I'm all for expending blood and sweat on a shoot, but tying up loose ends like this will save you some.
Once the bottom of the cup is removed, check the edge for straggling bits of metal that someone (like you) could cut their fingers on. Get some needle-nose pliers (I used the Gerber multitool that I always carry) and pull them off. I'm all for expending blood and sweat on a shoot, but tying up loose ends like this will save you some.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
