Print PDF
Favorite
Email
Step 3Placing the IC
1- Place the LM 386 in the project board as show in the image.
2-If you pick the IC in front of you (so you can read what is written on it) then the lower left pin is 1 and the pin number increase anticlockwise.Take a wire and join the 3rd pin to 4th pin(GND pin).
2-If you pick the IC in front of you (so you can read what is written on it) then the lower left pin is 1 and the pin number increase anticlockwise.Take a wire and join the 3rd pin to 4th pin(GND pin).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
