Print PDF
Favorite
Email
Step 13Close it up
Push the battery back into the slot, even if it means forcing it. It should be harder to put back in because the battery connector is now covered in solder.
Screw the battery cover on. This may require some effort because of the wires sticking out of it. If you're using a lower guage (thicker) wire, you may have to cut or sand a gap for it to fit.
Screw the battery cover on. This may require some effort because of the wires sticking out of it. If you're using a lower guage (thicker) wire, you may have to cut or sand a gap for it to fit.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
