After several people pointed out that there really should be some sort of charge protection circuit, d3z0rian commented suggesting this!http://www.bat...
Step 8: Join the Panels
Take the wire from the negative of the top panel and slip it underneath the tape on the bottom panel(or you could just replace the tape). Solder the end of the wire to the negative of the bottom panel. Take the wire from the positive (diode side) of the top panel and slip it underneath the tape on the bottom panel. Solder the end of the wire to the end of the diode on the positive side of the bottom panel.
Bio:Hi! I've loved electronics and electricity for as long as I can remember, and electric projects are something I do in my free time for fun. Everything I've learned about electricity is either from exp...read more »