Print PDF
Favorite
Email
Step 10Make it: Using the LCD UI and Propeller Platform SD
If you're using the Propeller Platform SD and LCD UI, setup is a little different;
1 - The Propeller Platform SD is pre-assembled.
2 - Follow this instructable to put together the LCD UI.
3 - You don't need a Prop Plug. The Propeller Platform SD has a bootloader, so you just unzip this file and copy to the root of your SD Card.
4 - You'll need to add a headphone jack or just add hookup wire to a small speaker on the LCD UI. You can see in the photos how I did it.
That's it! Have fun with your new talking clock!
1 - The Propeller Platform SD is pre-assembled.
2 - Follow this instructable to put together the LCD UI.
3 - You don't need a Prop Plug. The Propeller Platform SD has a bootloader, so you just unzip this file and copy to the root of your SD Card.
4 - You'll need to add a headphone jack or just add hookup wire to a small speaker on the LCD UI. You can see in the photos how I did it.
That's it! Have fun with your new talking clock!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
