Introduction: Make a Tazer/Stun Gun for 5$

Picture of Make a Tazer/Stun Gun for 5$

Hi, im gonna show you all how to make your own Tazer/Stun Gun! Probably you already have a old disposable camera in your house if you don't, you can buy one for 5$ almost everywhere.

You will need:

1 - Disposable Camera(http://store.kodak.com/store/ekconsus/en_US/pd/FUN_SAVER_Camera/productID.164407600 )
2 - Electric Wire
3 - 2x Screws
4 - Soldering Iron(Optional)

Mine is the KODAK FUN SAVER, in others disposable cameras the circuit board may be different but it should work too. If you need help just comment and i will help you.

I'm not responsable for anything that you do with the Tazer ! It may burn the skin if you touch somebody with the Tazer/Stun Gun !

If you liked this Project vote on it, in the Camera & Photo Skills Challenge! Thanks

Step 1: Disassembling the Disposable Camera

Picture of Disassembling the Disposable Camera

First you will need to open the Camera(see the photos).

Step 2: Disassembling the Disposable Camera (2)

Picture of Disassembling the Disposable Camera (2)

 First, take out the back of the camera. Now take out the film and the battery to prevent you from get a shock, take the front of the camera too.

(If you need help see the pictures or comment)

Step 3: Revealing the Circuit Board

Picture of Revealing the Circuit Board

Take out the circuit board from the plastic casing(like the photo). The second photo is the back of the circuit board. Be carefull while taking the circuit board, the capacitor may be charged and give you a shock(if you dont know what is a capacitor see the photo).

(If you need help see the photos or comment)

Step 4: Making the Tazer/Stun Gun

Picture of Making the Tazer/Stun Gun

If you have the battery in the circuit board, remove it. I used two wires like the one in the second photo. Connect one of the two wires into the right side of the capacitor and the other wire into the left side of the capacitor(see the third photo). In the end it should look like the fourth photo.

(If you need help just see the photos or comment)

Step 5: Finishing the Tazer/Stun Gun

Picture of Finishing the Tazer/Stun Gun

I used the original casing from the camera to make the Tazer/Stun Gun, you can use other things.

Drill a hole like in the first photo. Put the circuit board in his original place and pass te wires to the drilled hole(see the second and the third photos).


(If you need help just see the photos or comment)

Step 6: Finishing the Tazer/Stun Gun (2)

Picture of Finishing the Tazer/Stun Gun (2)

Make two more holes in the camera like the first photo, get two screws and pass them through the holes(see the second photo).  

Connect one of the two wires into one of the two screws and do the same with the other wire, my wire wasn't long enough so i needed to use two more wires and connect them to the other two, i used two wire nuts but you can use duct tape instead(see the third photo).

Just put the casing back on and it's finished!


(If you need help just see the photos or comment)

Step 7: Using the Tazer/Stun Gun

Picture of Using the Tazer/Stun Gun

To charge the Tazer/Stun Gun just hold the button of the flash for 10 to 30 seconds(or more). To give the shock just touch anything metal with the two screws or touch somebody with the two screws.

I'm not responsable for anything that you do with the Tazer ! It may burn the skin if you touch somebody with the Tazer/Stun Gun !

If you liked this Project vote on it, in the Camera & Photo Skills Challenge! Thanks

Comments

Advar (author)2013-08-31

Hide in a bike bag, wrap wires around seatpost and *zap!* thieft prevention! Of course, you'd need gloves to disable it, and rain would make it useless... :/
Nice idea :)

one10star (author)2013-05-03

This is sweet just made two. Of them!

kkirashi (author)2012-08-30

Why remove the battery?

tesla man (author)2012-07-10

It would be more of a taser if you removed the capacitor, and put metal wires in place of its leads. That is alot worse, especially if it flows through your whole body. Trust me, i did it and it made me shake the whole time i was in contact with the wires

ivars_v (author)2011-09-13

Definitely NOT safe to attemt this. Taser/stun gun is a high frequency AC, high voltage, low current device.Charged flash capacitor is DC HIGH CURRENT and can KILL you if you touch both capacitor leads. High frequency AC does not excite cardiac muscle fibers but DC will. Capacitor will also hold charge for a long time and will sneak up on you when you least expect it.

DuarteLucax (author)ivars_v2011-09-14

Hi, this is safe if you will only use it to protect yourself and not give shocks to a 80 years old person... I myself already get a shock from the "Tazer" and it really hurts! It will only be dangerous if you give a shock to a old person or a person that has heart problems. The capacitor as you say will hold the charge, for a long time but i think that anyone would charge the tazer and put it in the pocket, that will be a little bit stupid... :- )

About This Instructable

13,823views

32favorites

Bio: There are tree things i love in my life... Girls, Games & Gaming Laptops.
More by DuarteLucax:Make a cheap 3$ Projector
Add instructable to: