Print PDF
Favorite
Email
Step 3Jam the crap in there.
After soldering the wires together, and wraping em with electical tape (better yet, heat shrink),cut a square hole in the front of the altoids tin that the USB plug come out of.... Once you get the right size (I just used my pocket knife to cut through the tin), wedge the USB in through it, and glue it in, I just used hot glue, but super glue or silicon would work better.
Cut, or drill the hole in the lid for the LED. Once you wedge that in, glue it in also.
Same deal for the power switch, and cord exiting going to your phone. Dont be bashful with the glue/filler, cause the most secure everything is, the longer it'll last.
Cut, or drill the hole in the lid for the LED. Once you wedge that in, glue it in also.
Same deal for the power switch, and cord exiting going to your phone. Dont be bashful with the glue/filler, cause the most secure everything is, the longer it'll last.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
