With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
This project came about for two main reasons; I had cardboard left over from my Clone Trooper project, and I saw the fantastic job eplunkett ...
Cut out your Ukulele pieces from templates provided.
Glue the two base pieces (B & C) of Ukulele together using a suitable adhesive. I used PVA.
Glue the neck pieces together. Refer to templates for instructions. Pieces marked 'B' get sandwiched between pieces marked 'A'.
Cut for yourself nineteen right angle triangle pieces; 50x50mm.
Using a piece of old board large enough to accommodate the base of the Ukulele plus the triangle pieces, glue the pieces around the base as shown. I u...
Create the side pieces. If you can do this all out of one piece, great. I was limited to the size of cardboard sheets and made it from three pieces; t...
Apply a bead of glue to base piece and insert side panels. This may take a bit of gentle persuasion. TIP: before applying glue, ensure that pieces wi...
Glue the neck to the body. The most important thing here is to ensure that you maintain a true centre-line through the Ukulele, I.e.: you don't want t...
Glue support members to sound board of Ukulele
Step 10. Glue sound board to body of Ukulele. I failed to take a separate photo of this step, but I think you can figure it out. Step 11. Glue in pla...
Glue in place piece 'G'. Cut 8mm dowelling to same length as piece 'G' and glue in place as shown.
Step 13. Cut fret board to length, but don't glue in place yet. Step 14. Mark the position of the frets on fret board using a pencil. I used the foll...
Glue frets in place. I found toothpicks to be the perfect material for this. Accurate fret positioning is important, so ensure to correctly measure an...
Widen the head. Glue in place, using rubber bands to secure
Glue fret board in place.
Getting the string anchor pieces in place. Refer to template for instructions
Fabricate the timber bushes. These will accommodate the timber tuning pegs... OK, so not everything could be made out of cardboard.
Create the tuning pegs. Best to use hardwood for this. I used Jarrah; which I cut from some garden stakes. You may also be interested in this instruc...
Threading the string onto the Ukulele.
Tag files as:
The Pineapple Ukulele!by rich745
Playable Cardboard Ukulele...by eplunkett
Carboard Ukulele Standby eplunkett
a cardboard ukulele caseby sylrig
Need a Baritone Ukulele? Restring a Guitar!by tewharau
One Piece Ukuleleby Lforador
Ukulele LED Lightby joejoerowley
Ukulele Stands from cardboard boxesby juniortan
Paper Ukuleleby ANDY!
Make a Baritone Ukulele from a $10 Toy Guitarby tewharau
Download our new apps for iOS and android!
©Copyright 2013 Autodesk Inc. All rights reserved.
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.