With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
This project came about for two main reasons; I had cardboard left over from my Clone Trooper project, and I saw the fantastic job eplunkett did of creating ...
Cut out your Ukulele pieces from templates provided.
Glue the two base pieces (B & C) of Ukulele together using a suitable adhesive. I used PVA.
Glue the neck pieces together. Refer to templates for instructions. Pieces marked 'B' get sandwiched between pieces marked 'A'.
Cut for yourself nineteen right angle triangle pieces; 50x50mm.
Using a piece of old board large enough to accommodate the base of the Ukulele plus the triangle pieces, glue the pieces around the base as shown. I ...
Create the side pieces. If you can do this all out of one piece, great. I was limited to the size of cardboard sheets and made it from ...
Apply a bead of glue to base piece and insert side panels. This may take a bit of gentle persuasion. TIP: before applying glue, ensure that pieces will ...
Glue the neck to the body. The most important thing here is to ensure that you maintain a true centre-line through the Ukulele, I.e.: you don't want the ...
Glue support members to sound board of Ukulele
Step 10. Glue sound board to body of Ukulele. I failed to take a separate photo of this step, but I think you can figure it out. Step ...
Glue in place piece 'G'. Cut 8mm dowelling to same length as piece 'G' and glue in place as shown.
Step 13. Cut fret board to length, but don't glue in place yet. Step 14. Mark the position of the frets on fret board using a pencil. I ...
Glue frets in place. I found toothpicks to be the perfect material for this. Accurate fret positioning is important, so ensure to correctly measure and mark based on ...
Widen the head. Glue in place, using rubber bands to secure
Glue fret board in place.
Getting the string anchor pieces in place. Refer to template for instructions
Fabricate the timber bushes. These will accommodate the timber tuning pegs... OK, so not everything could be made out of cardboard.
Create the tuning pegs. Best to use hardwood for this. I used Jarrah; which I cut from some garden stakes. You may also be interested in this instructable; Make-a-Tuning-Peg-Shaver
Threading the string onto the Ukulele.
One Piece Ukulele Neckby funkleotto
The Pineapple Ukulele!by rich745
The Uke Sling - Ukulele Hanger, for indoor or outdoor use.by UK Ukee
Playable Cardboard Ukulele...by eplunkett
Carboard Ukulele Standby eplunkett
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.