With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Hi! In this Instructable, i'll be showing you step by step how to make this Venusaur themed planter pot for your flowers. This is a small project so i...
The materials are primarilly things around the home, so this project will be very cost efficient. Materials: Newspaper Plain A4 Paper Green Cardboar...
What you should do, is a bit of research. Grab some pictures, resources and start to visualize the final product. I've drawn a little sketch of the mo...
Ok, the first thing to do is to grab the plastic cup, and start measuring it to work out the dimensions of the model, as this cup is going to go insid...
The head is a little trickier than the rest of the body. The head itself is triangular shaped, so aim for a rounded triangle that should be a tiny bit...
Yay, now the messy part! Make sure your workspace is covered up. The glue i'm using at this stage is a flour and water mixture, this glue works well...
Alright, now that we have waited for these pieces to dry, it's time for building it! Firstly, place all your pieces to where they should go, then take...
The cup is the pot in which we will plant the flowers in. This cup goes into the body of the model. In order to do this, firstly mark the top and bott...
It's time for the head, now to assemble the head, we dont need to cut it out to stick it to place. No, we just have to hold in its place and stick it ...
The smoothing of the model is actually quite simple. Just fold up some newspaper into flat strips and cover these strips over the places where there a...
Now that we have completed assembling the model itself, we can now perform another layer of paper mache. This time, the glue i am using is a combo of ...
After the glue layer has dried, grab some A4 paper and create lots of strips, then apply these all over the model with the same glue from the previous...
This part is quite simple, first create about two layers of a bluish-green base coat. Then paint the eyes with red and white, they are semi-circular i...
Using some type of white polymer clay, create 12 claws and position them well onto the feet. Then take them and place them into the oven until they be...
Using the green cardboard, draw a leaf that will fit from the rim of the cup to the eyes of the venusaur, then cut out 6 cards and hold them all in a ...
Finally, use a sharp implement to puncture holes in the cup for drainage when watering the flowers.
Now all you have to do is to fill the cup with dirt, place a few pretty flowers into it and congradulations!! You have made your own personal pokemon ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »