Print PDF
Favorite
Email
Step 4Drilling the Handle
Measure half way (1 1/4 in.) across the mouth piece and mark it.
Get a 1/4 in. drill bit and again drill 1/8 in. into the mouth at the halfway point you marked earlier.
NOTE: I didn't bother drawing a line along the length of the mouth because I let it rest on the teeth while I drilled (see picture 2).
Get a 1/4 in. drill bit and again drill 1/8 in. into the mouth at the halfway point you marked earlier.
NOTE: I didn't bother drawing a line along the length of the mouth because I let it rest on the teeth while I drilled (see picture 2).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
