Print PDF
Favorite
Email
Step 2Connecting components & finishing
1. Make a 5 mm whole near the voltage out put and connect the LED and Resistance as shown in the circuit diagram, observing the polarity of the current.
2. Test it by hooking to the mains power socket.
3. Finally glue the diffuser on it.
See an other view of the built up night light
2. Test it by hooking to the mains power socket.
3. Finally glue the diffuser on it.
See an other view of the built up night light
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
