Introduction: Make a Glowing Cup!

Turn a cup into a glowing glass!

Step 1: Get the Supplies

Obtain the following:
1. A semi transparent cup
2. Any Color LED's
3. Batteries and a battery case
4. soldering equipment and know how.

Step 2: Assemble the LEDs

Take some wire (about 18 gauge) If its insulated strip the insulation off.

make a circle with it that will fit in the bottom of the cup and press against the outside.

make another circle that is about a quarter to half inch smaller.

wire and solder in the LEDs between them all in the same polarity.

wire and solder the batteries up to the Circle wires on the inside.

Comments

author
M1 Monty made it! (author)2008-10-23

Very nice graphics there!

author
mattameo213 made it! (author)mattameo2132008-10-23

Thanks!...

About This Instructable

1,701views

3favorites

License:

More by mattameo213:Tunes To Go!Create C++ Programs on the EEE PCCool Trick With iPods!
Add instructable to: