Step 4: Cutting the corners
I don't have any fancy tools so I make do with what I have.
As the corners was way to sharp I needed to make them round. First I found something that I could use, a bowl in my case.
Then I did measure how much I wanted to remove, I decided 80 millimetres.
I cut of the corner roughly with a saw, used the rasp and sandpaper to get it smooth. Use the rasp on the wood not the thumb.
As the corners was way to sharp I needed to make them round. First I found something that I could use, a bowl in my case.
Then I did measure how much I wanted to remove, I decided 80 millimetres.
I cut of the corner roughly with a saw, used the rasp and sandpaper to get it smooth. Use the rasp on the wood not the thumb.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
