With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
I couldn't sleep, so I made knives. (For Burning Man gifts.) Ingredients: 1. A dull hacksaw or bandsaw blade 2. Electrical tape or really wide heatshrink tubing Tools: ...
Draw with a pen an outline of the hacksaw blade on the piece of paper. We used a blade so dull that it was described as "polished". Choose a ...
Using the paper template, mark on the blade where you plan to cut it, and the thumb notch etc you plan to grind out.
Score the band with a file at the place(s) you need straight cuts. Then put the blade in a vise to hold it tightly, and use pliers to ...
We spent about 45 minutes setting up the grinder, but hopefully your grinder is ready to go. 1. Dull any sharpness the blade may still have. 2. Sharpen both ...
Grind out the thumb indentation. Again, keep your fingers on the side opposite the grinder while you are doing so.
Use electrical tape and wrap it tightly around the dull end of the knife to make the handle. Or, you can use some large heat shrink tubing and ...
Now hand them out to your friends and make everyone happy!
How to make Knife and Sword Easyby bjackson24
Saw Blade Survival Knifeby Chet Schrader
Design and Build a Full Tang Knifeby pfdanielson
Make a Push Dagger from a Pipeby jackowens
Make a Two Bladed Pocket Knifeby Matin
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.