Print PDF
Favorite
Email
Step 4Making the dish
Making the dish on the mold.
I had some old sign corugated plastic and I decided to use this for my first dish.
First I cut it so that it would fold down somewhat over the mold.
I held it down with rocks and the sledgehammer.
Look near the sledgehammer. See how the cuts overlap when it gets held close to the dome?
Wherever they overlap, you cut along again and remove the undercut.
Then you hold it all down with rocks or whatever and tape the sections together.
I had some old sign corugated plastic and I decided to use this for my first dish.
First I cut it so that it would fold down somewhat over the mold.
I held it down with rocks and the sledgehammer.
Look near the sledgehammer. See how the cuts overlap when it gets held close to the dome?
Wherever they overlap, you cut along again and remove the undercut.
Then you hold it all down with rocks or whatever and tape the sections together.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
