Print PDF
Favorite
Email
Step 2Make some guide marks
If you know where you will definitely want a seam, or if you want to mark in special features of the object, do it now. If your object is symmetrical, mark a centre line now. If you want to be really accurate, measure the object to find the centre line.
I marked the ventilation holes on the helmet and the stripe I will eventually put down the centre. I also marked along the bottom edge of the helmet.
I marked the ventilation holes on the helmet and the stripe I will eventually put down the centre. I also marked along the bottom edge of the helmet.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
