Introduction: Make a Shining Charm With Rainbow Loom

One day, my daughter Lisa made a bracelet by Rainbow Loom for me. I wanted to make it shining. After many attempts, I finished the stuff named eBloom that can sensor motion and driver LEDs blinking with different mode. You can set eBloom with smart phone. It is a magic feature and you can design special eBloom by yourself.

Now the project is raising funds on Indiegogo. My family and I really appreciate your making this project happen. Let's light up the life together.

https://www.indiegogo.com/projects/1323510

Step 1: Prepare

  • a rainbow loom kit
  • bands
  • c-clip
  • eBloom(LED board)
  • a CR1220 battery
  • phone

Step 2: Make the Charm With Rainbow Loom

Picture of Make the Charm With Rainbow Loom

Follow the Instructional Videos Rainbow Bloom Charm from Rainbow Loom.

Step 3: Set the LED Board(eBloom)

Picture of Set the LED Board(eBloom)

By default, The eBloom is shining with random pattern when you shake it. You can set the Necklace pattern by phone in not bright environment.

Step 4: Hook the LED Board(eBloom)

Picture of Hook the LED Board(eBloom)

Hook the eBloom to charm and hook the charm to a necklace.

Step 5: Enjoy and Make It Happen

You can support it https://www.indiegogo.com/projects/1323510 Thank you.

Comments

R1234567890 (author)2015-11-02

How did you get those bands?and it is so nice!

R1234567890 (author)2015-11-02

How did you get those bands?and it is so nice!

R1234567890 (author)2015-11-02

How did you get those bands?and it is so nice!

About This Instructable

287views

6favorites

License:

More by LeoYan:Make a shining Charm with Rainbow Loom Make a programming/test Clip by PCBMaking low-power(0.12μA) Arduino control board
Add instructable to: