Print PDF
Favorite
Email
Step 2Plus side
Gather these three pieces for the plus side of the holder. The top left of the conductive piece will be longer than the felt.
Iron on the conductive piece marked '+' to the stem piece. Apply light, even pressure.
Bend the lip of the conductive piece over the other side and iron it down.
Align the red piece (glue side down), and gently iron it on to the felt. Be careful not to glue it to the table. Flip the composite and put aside.
Iron on the conductive piece marked '+' to the stem piece. Apply light, even pressure.
Bend the lip of the conductive piece over the other side and iron it down.
Align the red piece (glue side down), and gently iron it on to the felt. Be careful not to glue it to the table. Flip the composite and put aside.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
