loading
I only had 15 minutes to make a table and I was at Techshop, www.techshop.ws  so I knew I could do it.  I had some 5/8" MDF that I cut into a 21" square and cut some 2" x 4" pine into legs at 20" long.  I cut 3" MDF skirts to go down the side of the table to stabilize and secure the legs.  I glued and clamped the skirts to the top piece of MDF and glued and clamped the legs to the skirt as well.  Then I brad nailed everything together, and in 10 minutes I had a free table made out of scrap wood.  

About This Instructable

809views

15favorites

License:

More by jaykaff:Make a table in 10 minutes.  I made it at Techshop!!  www.techshop.ws 
Add instructable to: