This prank is one of my all time favorites I devised not too long ago. I mean, who's expecting there neighbors doorbell to blow up!
In this instructable I'll be showing you how to make an exploding doorbell made from common electronics parts you can get at your local radio shack and hardware store.
In this instructable I'll be showing you how to make an exploding doorbell made from common electronics parts you can get at your local radio shack and hardware store.
Remove these ads by
Signing UpStep 1: Materials
For this Intractable you will need:
*A Doorbell (duh)
*An SCR or Silicon-controlled rectifier (optional but highly recommended)
*Some Wire
*A Soldering Iron
*one single SMALL, key word SMALL firecracker. (See picture for what I mean by small. there's only a handful of standard sizes for
firecrackers and the smallest pack more than enough punch.
*A small 1 cell LiPo battery( < 300 mah) these can be found in rc toys and can also be found sold separately at hobby shops
*A Doorbell (duh)
*An SCR or Silicon-controlled rectifier (optional but highly recommended)
*Some Wire
*A Soldering Iron
*one single SMALL, key word SMALL firecracker. (See picture for what I mean by small. there's only a handful of standard sizes for
firecrackers and the smallest pack more than enough punch.
*A small 1 cell LiPo battery( < 300 mah) these can be found in rc toys and can also be found sold separately at hobby shops
Visit Our Store »
Go Pro Today »
Yeah, don't want to set your own house on fire.