Print PDF
Favorite
Email
Step 3Mount Fan
In my case I'm using a Blank plate from an old case bay.
-- Check that the fan mount location will allow for free airflow, space, room warp drive etc.
-- line it up and mark mounts and inner diameter of fan.
-- Drill away.
-- After mounting double check that blades still spin freely.
-- Check that the fan mount location will allow for free airflow, space, room warp drive etc.
-- line it up and mark mounts and inner diameter of fan.
-- Drill away.
-- After mounting double check that blades still spin freely.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
