Print PDF
Favorite
Email
Step 2Painting
With the protective layer acting s a stencil it's easy to spraypaint the logo onto the acrylic. I masked off the sides with some masking tape and use a couple coats of black spraypaint.
After that it's easy to remove the protective layer. The only trick is to get the little islands inside a few of the layers. Just get the tip of the blade of an X-acto knife in there and it comes from off.
After that it's easy to remove the protective layer. The only trick is to get the little islands inside a few of the layers. Just get the tip of the blade of an X-acto knife in there and it comes from off.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
