Make an LED Blaster

Step 8: Stuff the Blaster

Once you have wired up your electronics and built yourself a raygun, you need to install the electronics in the gun. I glued a thin strip of wood to each blue LED array to make them easier to install.

I put the 4 AAA battery pack in the magazine housing, and made a little cap for it that looks like the end of a magazine.

The Speaker that came with the Radio Shack Sound Module was a perfect fit inside the PVC endcap. I drilled sound holes in the end of the cap.

Once you get the circuitry in place, you can solder up the connections to the effects and stuff the remaining wiring where ever you can fit it.

Comments

[mack204]

(removed by author or community request)

[Fayshun]

Unlike your comment..... I liked it.

[Irzum]

this is use less i want something that really shoots some small projectiles

[finkbuilt]

You could always build one that had a laser AND airsoft guts.

[alvincredible]

or take the led, wire it up to a battery, and shove it down a styrofoam nerf bullet! WoOoOoO!