Introduction: Make an Uber Paper Airplane

By

Make the Avro Arrow of paper airplanes

Step 1: Parts

Parts list
1. paper
2. pen
3. scissors
4. tape (optional)

Step 2: First Fold

fold in half hot dog style

Step 3: Fold Triangles

fold the first set of triangles towards the center stop about 5mm away from center line. mark the center fold with a pen line to make it visible

Step 4: Fold the Main Shape of the Fusilage (aka the Second Set of Triangles)

fold from the center of the first triangles to line up with the center line.

Step 5: Wings!!!

fold your wings over make sure they line up

Step 6: Tail Fin

cut your tail fin but do it at more of an angle with a longer cut mine was too steep

Step 7: Vents

these vents act like intakes in an engine they speed up the air over the back of the wing makesure they line up when you cut them

Step 8: Stabilisers

they are made by folding the wings in they level the flight. line them up when floding like when you did the wings

Step 9: Stabiliser Stabilisers

these create lift and stabilise it vertically

Step 10: Take Off Checklist

1. Arm: check
2. Plane: check
3. Air: check
4. Avatiors: check

Prepare for take off
Lift off

this is my first instructable tell me what you think of it