Step 4:
Sollution #2: Fix for wire fatigue and breakage at terminal:
The bare wire can break at the terminal, especially small wires ans any time there is flexing.
This can be solved by stripping about 1/2" of insulation, then winding the bare wire back around the insulation before inserting it into the terminal. The wire-over-insulation adds a lot of strength.
The bare wire can break at the terminal, especially small wires ans any time there is flexing.
This can be solved by stripping about 1/2" of insulation, then winding the bare wire back around the insulation before inserting it into the terminal. The wire-over-insulation adds a lot of strength.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
