Make Lockpicks From What You Can Find in a Garage(like Macgyver or Not)

You get shown how to make lockpicks.
i posted this long ago then took it off and left .

Step 1: MATERIALS

you will need:
A bicycle tire (the kind with spokes)
a windsheild wiper(the kind That is somtimes attatched to vehicles)
screwdriver
dremel tool or benchgrinder
some string(optional but fun to play with)
Some plyers (2 is fine)
and gogles(or you will have a lot of eye pain for a while)

Step 2: Get Your Pick Material

first you will need a bicycle tire its not exactly something you need to sell your soul for since you probably have one in your garage or elsewhere.

Step 3: Dismantle the Tire

Take All the rubber stuff off of the tire and unscrew the screw looking things then cut off the spoke and harvest your pick material.

Step 4: Now Get Your Tension Wrench Material

remember that windshield wiper you stole off of your neighbors car (or perhaps you got it out of your garage) well its time to gut it there 2 metal strips that you must take(by force if necessary).

Step 5: Making the Pick

you take the spoke and those plyers and bend the spoke into a pick shape

Step 6: Then Grind It Thin

you take that dremel tool or bench grinder (you could even use the sidewalk) and grind the sides thin thin enough to put in a keyhole.

Step 7: Make the Pick Look Good

take the ugly peice of metal you just made into a pick and do something to make it look good
like wrap string around it to make a handle.

Step 8: Making a Tension Wrench

take a metal strip (the one you got from the windsheild wiper ) and stick it in a lock then bend it (or you can use plyers.

Step 9: Now You Have a Lockpick and Tension Wrench

Now you have a lockpick and tension wrench FEEL EMPOWERED FEEL VICTORIOUS HAHAHAHAHAHAHAHAHA! whatever good luck trying to use it