3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

Make rope out of dead plants -- with no tools

Step 7Contributed notes

There are a bunch of neat suggestions and tips in the comments, and I'd like to highlight some here.

  • Purocuyu says that rolling the fiber on your thigh works if you wear jeans, but recommends putting a patch of scrap denim over your leg anyway -- this technique can wear through cloth pretty quickly.(Wade Tarzia mentioned this method. It's a variant on the "twist and kink" mentioned in the section "Alternative techniques".)
  • Purocuyu has had success with yucca, which is great news, since the stuff grows like a weed in some areas. I've heard of retting yucca leaves to extract the fiber, but this commenter says to try scraping the leaf body off of the fiber using a sharp-edged implement.
  • Wade Tarzia notes that there is historical precedent for using fiber from coconut husks. (Another good source, because coconut fiber should be plentiful where it exists at all.)
  • Several commenters have noted that strips of cotton from old t-shirts work well.
« Previous StepDownload PDFView All StepsNext Step »
1 comment
Dec 3, 2011. 6:15 PMdak415173 says:
you said your fibers were 3 feet and when twisted together were only 2 feet but what if i want somthng longer then that how would i connect two sections together

Pro

Get More Out of Instructables

Already have an Account?

close

All Steps Viewing
View all steps of an Instructable on the same page when you're a Pro Member.

Upgrade to Pro today!
10
Followers
1
Author:phyzome
Software Engineer at Basis Technology. (Current as of August 2011.)