Pez dispenser(s)
Plastic valve stem cap(s) or reuse your old ones
Silicone caulk


Caulking gun
Soda can(s)
Masking/painters tape

Paper plate (optional) As with all projects, read all of the instructions first, before proceeding to make your own.

Step 1: Prepare the Head

Take the head off the Pez dispenser. To do this, just pry it back until snaps off.

Tape the head down to your work surface. We used a paper plate (and also a tray) so we could move the project to let it dry. Be sure to tape off the back of the head, to form a wall.

Tip: You could set the head in a lump of modeling clay, but be sure to still tape off the back of the head.

<p>I've built quite a few valve cap covers in my day but never figured out how to do Pez heads. Your mounting device is awesome and now I can continue my work. Thank you for sharing.</p>
I like this idea.
Great idea! Seems to me you could pretty much do the same with anything. I'm thinking of making valve stem caps from dice using the same method.
cool as!

About This Instructable


19 favorites


More by lime3D: Make your pumpkins live longer Worlds' easiest sugar skulls Haunted Tombstones
Add instructable to: