Print PDF
Favorite
Email
Step 5More Metal tape!!
Now to make the PVC look sexier we will be covering it with metal tape.
1. make a strip a wide as the ridges and wrap it around the side of the PVC cap.
2. lay the pvc cap small end down and trace the outside and inside to make a silver ring. cut out and apply the ring.
3. cover the remaining area with a strip.
4. Finally there will still be a little white on the small opening so cover that as well.
1. make a strip a wide as the ridges and wrap it around the side of the PVC cap.
2. lay the pvc cap small end down and trace the outside and inside to make a silver ring. cut out and apply the ring.
3. cover the remaining area with a strip.
4. Finally there will still be a little white on the small opening so cover that as well.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
May 30, 2008. 5:04 PMhawklet2010
says:
as an alternative to the metal tape in this step, you could go to a hobby lobby and pick up a small bottle of silver paint in the model kits section. this would give the same color w/o the wrinkle that the tape might cause.
Reply
8
May 30, 2008. 6:01 PMmspark400 (author)
says:
true, i was looking for the spray chrome silver but they were out and i was impatient. V2 will feature many changes and improvements. enjoy, mspark400
Reply
 |
Add Comment
|
