Introduction: Make Your MSP430 IC Work Independently(without Launchpad Board)

Picture of Make Your MSP430 IC Work Independently(without Launchpad Board)

this will show you how to make your MSP430 IC work independently
so that you can make your project portable just with two AA battery.

Step 1:

Picture of

you need two AA battery offer 3V to your portable chip

Step 2:

Picture of

upload your program first.

remove the chip from launchpad

connect your IC like this,and it works as you connect the battery

Step 3:

hope you enjoy~~~


and you must want to know make an EASY MSP430 LaunchPad ISP with only 4 wires!!!

Comments

Maxisokol (author)2014-03-18

Hey! What if I have a bigger 20pin IC?

It would be much better if you'd actually explain what connects where. I'm assuming the other pin that you've connected to VCC is reset, but how can I be sure? =\

About This Instructable

8,066views

13favorites

License:

Bio: 重度網路程癮者
Add instructable to: