Print PDF
Favorite
Email
Step 5Modifying the SCART Adapter
Modifying the SCART Adapter
As stated earlier if you place an input voltage on pin 8 in the SCART connector it will automatically switch the TV to AV mode so lets do that
Remove the plastic from the SCART Adapter (sadly I have no pictures of this but be more gentle then I was because they seem to be quite fragile.) Solder the short thin red wire to pin 8 in the adapter and to the center pin of the second RCA female connector. Then solder the short think black wire to the shield of the RCA female connector and to the metal frame around the adapter.
Reassemble the adapter.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
