Print PDF
Favorite
Email
Step 2CAMERA SUPPORT
construct supports for the axes that hold the camera, put the cdrom axis in the border. design the support its camera model.
hold the laminates with aluminium bars and put the camera support laminates, it must move freely.
put a gear or another system in the right face, and put a servomotor with another gear.
hold the laminates with aluminium bars and put the camera support laminates, it must move freely.
put a gear or another system in the right face, and put a servomotor with another gear.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Feb 5, 2009. 10:34 AMMaggy160
says:
No help for support construction? Nodal point of lens is not centered in sketch picture 2. Construction is obstructing view of very wide angle lenses. Most of the disks holding the camera seem like a total waste of material to me. I don't see any shutter control.
Reply
 |
Add Comment
|
