With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
In this, my first instructable, I will provide enough information to allow you to make your own small scale Boston Bomb as a fridge magnet. We just had ...
In this case - I used veroboard (sometimes called Stripboard) Lay the components out, and use point to point wiring on the back of the board to connect ...
The Boston Bomb is constructed using a sandwich technique, where the top board holds the components, the bottom board holds the magnet, and the battery holder is held ...
This is the circuit diagram. It is essentially a DC-DC converter, and a PIC 16F84 (or PIC 16F88) to drive it. Sw1 is a test switch - push ...
If you would like to create your own PCB, here is the PCB layout. In the PCB version, I did not worry about the eyes.
Here is the parts placement guide for the PCB.
Here is the unit mounted on the fridge - The kids and I believe that it is the best fridge magnet on the planet!!!If you would like a ...
LED Robot Signby krummrey
Blowing up stuff with capacitor bank!by GoodAtIt
DIY Off Grid LED Grow Lightby earthineer5825
RGB-LED light sabreby jthie
(16) Power Distribution Panel For Pluggablesby Dr.Bill
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »