Print PDF
Favorite
Email
Step 2Make the divider and attach the legs
Get the three way segmented hose divider.
1. Drill a hole in the center as shown. Hole should be the diameter of the 8-32 bolt (about an 11/64 inch bit). Attach all the segmented hose segments into three equal sections. Then snap on the segments to the divider. See the pictures if you get confused.
1. Drill a hole in the center as shown. Hole should be the diameter of the 8-32 bolt (about an 11/64 inch bit). Attach all the segmented hose segments into three equal sections. Then snap on the segments to the divider. See the pictures if you get confused.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
