Print PDF
Favorite
Email
Step 3The mount for the camera mount
We are going to put on the mount for the camera mount.
1. Put the 8-32 socket head bolt through the adapter as shown. Then put the bolt through the hole drilled in the three way splitter.
2. Screw the lock nut onto the end. Tighten enough to keep the adapter from spinning freely, but not so much as you can not turn the adapter.
1. Put the 8-32 socket head bolt through the adapter as shown. Then put the bolt through the hole drilled in the three way splitter.
2. Screw the lock nut onto the end. Tighten enough to keep the adapter from spinning freely, but not so much as you can not turn the adapter.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
