Print PDF
Favorite
Email
Step 4The camera mount
Here we will be making the part that attaches the camera to the tripod.
1. Put glue on the 1/4 inch bolt and quickly slide it into the nozzle as shown.
2. Make sure the bolt does not turn with glue
3. Add rubber washers to the end of the 1/4 inch bolt until about 3/8 of inch of the bolt are visible above the washers.
1. Put glue on the 1/4 inch bolt and quickly slide it into the nozzle as shown.
2. Make sure the bolt does not turn with glue
3. Add rubber washers to the end of the 1/4 inch bolt until about 3/8 of inch of the bolt are visible above the washers.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
