Print PDF
Favorite
Email
Step 5Adding Grip
In this step we will add some grip to our Gorilla Pod. This step is optional, but recommended. I used some Lego tires. They will be secured with hot glue. Thanks to Duck Lemon for the idea to use Lego tires!
1. Put tires onto the legs, two on each leg.
2. Glue them in place with hot glue.
3. Cut one tire into three or four sections with wire cutters or scissors.
4. Glue one section onto the end of each leg.
1. Put tires onto the legs, two on each leg.
2. Glue them in place with hot glue.
3. Cut one tire into three or four sections with wire cutters or scissors.
4. Glue one section onto the end of each leg.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Apr 24, 2008. 7:24 PMaxist47
says:
A good place to get a bunch of these tires is through brinklinks.com You can buy a dozen or so for under a dollar. Just do a search for "30.4 x 14 Lego tires" you should get a few thousand hits.
Reply
 |
Add Comment
|
